✔ DiResta Boot Knife

#shorts In this video, I develop a boot knife and sheath. The prototype twist release turned out pretty cool - Enjoy!

from jimmydiresta https://www.youtube.com/watch?v=PjEQmEYGUIQ

DiResta Trash Can Caddy!?!?

DiResta 6-Piece Screwdriver Set: https://ift.tt/BfykuXa https://ift.tt/3qViHpK check out the new Lincon MP 215i In this video I make a concept I conjured up few month back... I need a place for towels and spray bottle!!! I alway think it should be near the trash can so I made a trash can caddy! Thank you https://ift.tt/3qViHpK https://ift.tt/0rO6Dd1 https://ift.tt/i5MDfhv https://ift.tt/vc5ezxC

from jimmydiresta https://www.youtube.com/watch?v=YsAFdksZWTY

DiResta Fire Pot Grill RING

In this workshop project, I make a 46" steel bbq grill Ring for my fire pot!!! I used a 3/8" plate steel 2’x4’ and the challenge was fitting all of the ring's parts into the stock! The fire pot is over 125 years old it came with my house, and no one can honestly tell me where it came from or why it was here at the farm. It weighs hundreds of pounds and it is thick cast steel. We hang around the fire in this pot every summer weekend, and now with the new grill ring will be able to hang around talk and eat!!!

from jimmydiresta https://www.youtube.com/watch?v=AyrMz2jPWn4

✔ DiResta Creating Maker Pants

I have been modifying my Levis for about 10 years.. here is an old video of me modifying my jeans! #shorts

from jimmydiresta https://www.youtube.com/watch?v=bgpTaDnsXb4

DiResta #shorts: [How to Cut a Burrito]

@jimmydiresta #shorts In this video I thought that I would figure out how to build a guillotine. With a little ingenuity and creativity in the shop, I built one. As with all of my projects, this guillotine build provided some challenges, but at the end of the day, it was a shop experiment that was super fun to build and turned out awesome!

from jimmydiresta https://www.youtube.com/watch?v=nO0xovdpuak

Entryway Accessory Wall Cubby Organizer

The key to a clean and organized entryway is ample storage that is accessible and available.

That means lots of hooks, lots of shelves, good boot storage.

But what about those small items?  What about mittens, gloves, hats, scarves?  

I recommend in every entryway, a small cubby organizer that keeps all the little things neatly stored and accessible.

So there's a empty shelf available for your gloves.  

Actually TWELVE empty shelves available.

I've built this type of organizer before (with hooks here) and it is a must have in the entryway.  I can't recommend cubbies like this enough.

But in this plan, I want to do something a little different - I want to make it easy to customize in size, so you can fit it in very specific spaces.  Here's how you can design and build your very own cubby organizer, just right for your space.

from Recent Project Plans https://ift.tt/JTracp6

DiResta Gate Mouth Tool Bag

In this video I make copy of a canvas Kline gate mouth tool bag but in leather! ..Weaver leather to be exact! https://ift.tt/W0Lpca2 thank you and enjoy Check out My Tools: https://imakeny.com

from jimmydiresta https://www.youtube.com/watch?v=60u2jQhhgtY

Frameless Mudroom Bench with Shelf Help

If the mudroom is the first thing you see when you walk in the door, why not make it beautiful and functional?

For a remote cabin, we had a awkward wall behind the front door with some bent hooks and leftover cabinets.

With about a $200 investment, using the existing cabinets, this is what it looks like now:

The bench was the game changer.  It was the structure that was needed to make this wall into a mudroom.

Why We Love this Open Bottom Bench

• Easy to build design
• Customizeable in size and color for a perfect fit - even 14 feet long as shown!
• Accessible bottom is easy to clean
• Largest possible opening for taller boots, or baskets and bins
• Pairs well with other cabinets, organizers, under windows or other architectural features

How this Bench is Built

This bench is super easy to build!  I was able to build it myself, in a 14 foot length.  Here's the video tutorial:

VIDEO

Free Plans for Frameless Open Bottom Mudroom Bench

from Recent Project Plans https://ift.tt/qYFGePs

DiResta Saw Blade Machete!

Go to https://ift.tt/d0JLweh to apply now to get a special interest rate discount and save even more. Thank you Lightstream! In this video I take a 16" circular saw blade and manipulate a doughnut shape into a 32" machete! It was a blacksmith experiment in the process I learned a ton. I had to use the break drum forge in the start because the part didn't fit into the gas forge until I was able to open the ring a little bit... Thank you for the love! Thank you https://ift.tt/ScBoTNt https://ift.tt/vFgJhDG

from jimmydiresta https://www.youtube.com/watch?v=X5m5Boah5Jo

DiResta Rockler 2x4 Challenge

Rockler timed 2 x 4 challenge official rules: Three standard 8 foot two by fours are required for this challenge. Each 2 x 4 has a specific time designated How long each project should take per 2x4 Each Maker has 30 minutes… two hours… and a one day build… for each of the three 2x4’s respectively The challenge will be held on Instagram. When you post your pictures you must include the #rocklertimed2x4challenge As this will be your official entry into the contest. This contest will run from August 4, 2022 until November 1, 2022. The first week of November myself and the other judges will deliberate on who has won each of the three timed categories plus the aggregate of all three combined for the grand prize. The prizes are as follows: $100 Rockler gift card for each of the three winners for the three timed categories. The grand prize winner will receive a $200 gift to spend at www.aglimpseinside.org Two custom blades and a brass ice pack from Jimmy Diresta. And engraved stainless steel Tumblr and a T-shirt from Derek From Malden. Please note that as this challenge is timed, we encourage all makers to work safely! RocklerTimed2x4challenge Judge video submissions: A Glimpse Inside: https://youtu.be/dk7I91Xna6w Char on instagram: https://ift.tt/sM87DJr The Evening Woodworker: https://youtu.be/NjoDla6orv0 Upcycled by Bri: https://youtu.be/S29X2ld8C5Y Derek From Malden: https://youtu.be/i66zky3_7-s HUGE Thank you to https://ift.tt/D1GQcAv For Sponsoring this Challenge! and personal thank you to http://www.titebond.com xo

from jimmydiresta https://www.youtube.com/watch?v=1fkK-EPus-4

DIY Floating Penny Coffee Table

In this video, I'll show you how to make a one-of-a-kind floating coffee table wrapped with pennies. Materials used • Lots of pennies • Epoxy resin kit - https://amzn.to/3zhukwF • Mixing bucket - https://amzn.to/3JlF8i6 • Silicone brush - https://amzn.to/3bjzRLo • Battery-powered LED light strip kit - https://amzn.to/3BusR95 • Rechargeable battery pack - https://amzn.to/3vvxv2L • 3/4in plywood sheet • Sheathing Tape - https://amzn.to/3PQJdNM Tools used • Drill - https://amzn.to/3OGqcfz • Nail gun - https://amzn.to/3OHe3GZ • Torch - https://amzn.to/3JlF8i6 • Heat gun - https://amzn.to/3Jpa2WU • Hot glue gun - https://amzn.to/3Bqghrq • Orbital Sander - https://amzn.to/3BKsDuP • Sandpaper - • Woodworking router - https://amzn.to/3JgBxlc Coffee table dimension Table dimensions (1) Tabletop (25inx37inx3/4in) (2) Long side (37inx7inx3/4in) (2) Short side (25inx7inx3/4in) (4) Base (5inx5inx3/4in) (4) Base support (5-5/8inx3-1/2inx3/4in) (12) Wood bracket parts (2-1/4inx2-1/4in) Base dimension (2) Long side 16inx12inx3/4in (2) Short side 10.5inx12x3/4in (2) Mount surface 10.5inx3inx3/4in Steps overview Step 1.) Build a table, paint it white or the color of choice. Step 2.) Apply a coat of epoxy, and let harden. Step 3.) Then build up the epoxy on all sides. Step 4.) Sand the table down and exam to see if all pennies are covered. Step 5.) Pour one final layer of epoxy. Step 6.) Add LEDs to the inner frame Step 7.) Build, paint the base and Attach the base and exp ********** Support my work ********** My Woodworking Plans: https://ift.tt/zo8Xefw Help me make more Video: https://ift.tt/g8jdeGW YouTube: Subscribe & "RING the Bell": http://bit.ly/1PtWJEd Instagram: https://ift.tt/Jz4ZDv7 Pinterest: https://ift.tt/yTw4CJE

from DIY Creators https://www.youtube.com/watch?v=Ot7qPlpCdPM